HF1000

Pipe Range: 1200 – 630mm
Model Number: HF1200

FEATURES

• The HF1200 is easily operated by one person.
• The heater, facer and hydraulic power unit are integral parts of the machine, minimising set up time.
• Hydraulic clamp locking and a unique pipe alignment mechanism rapidly overcome pipe misalignment problems.
• Joints are rapidly prepared with the powerful hydraulic facer.
• The heater temperature is raised to 220°C from ambient in less than 35 minutes.
• Quick change non-stick heater surface.
• The HF1200 is designed to cope with the worst of field conditions, is tough and reliable, with little maintenance required.
• For transportation or storage it readily fits inside a 20' shipping container.
• Wheel base for towing from joint to joint.
• Low maintenance requirement.

SPECIFICATIONS

Butt machine	3700L x 2300W x 2200High (guard closed)	3550kg approx.
Hydraulic power unit	3.8kw, 415volt, three phase
Heater Plate	1250mm diam., 13kw per phase, 415 volt
Facer	three blades per cutting face
Heater (element pad only)		100.0kg
Fittings holder		100.0kg
Reducing liner (set) 1200-1000mm		183.0kg
Reducing liner (set) 1000-900mm		148.0kg
Reducing liner (set) 1000-800mm		168.0kg
Reducing liner (set) 800-710mm		107.0kg
Shipping container		2300.0kg

Minimum recommended portable generator capacity for field use is 35.0kva, 415v, three phase.

DOWNLOADS

HF1200 Flyer

HF1200 abbreviated parts list

*You require Adobe Acrobat to view the document above.